Los Angeles, CA Building Permits Guide
Los Angeles building permits are issued by the Department of Building and Safety (LADBS) at 201 N. Figueroa St., Los Angeles, CA 90012. Apply online through the ePlanLA portal or the LADBS Services Portal. Commercial plan review (regular plan check) typically takes 4 to 8 weeks for initial review. Smaller residential and tenant improvement projects may qualify for same-day counter plan check. LADBS permits are valuation-based, with fees starting around 0.5% of the first $50,000 in construction value.
What is a building permit in Los Angeles, CA?
A building permit is a written authorization from the City of Los Angeles Department of Building and Safety (LADBS) that allows construction, renovation, demolition, or change of use on a property within city limits. Los Angeles requires building permits for most construction activity to ensure projects comply with the California Building Code, fire safety standards, zoning regulations, seismic design requirements, and the city’s local building ordinances. The City of Los Angeles issues more building permits annually than any other city on the West Coast, reflecting its massive and constantly evolving built environment.
Los Angeles at a Glance
- Population: Approximately 3.9 million (2024 Census estimate) – 2nd largest city in the United States
- County: Los Angeles County (largest county in the U.S. by population, over 10 million residents)
- Permit Authority: City of Los Angeles Department of Building and Safety (LADBS)
- Online Portal: ePlanLA (electronic plan submission) and LADBS Services Portal
- Building Code: 2022 California Building Code (Title 24) with City of Los Angeles amendments (LAMC Chapter IX, Article 1)
- Growth Context: Los Angeles is in the midst of a major construction cycle driven by housing mandates, transit-oriented development, and post-wildfire rebuilding efforts. The city processes tens of thousands of permit applications annually across residential, commercial, and infrastructure projects.
- LADBS Headquarters: 201 N. Figueroa St., Los Angeles, CA 90012
- General Info Line: (213) 473-3231 or dial 3-1-1 within the City of Los Angeles
Building permit review in Los Angeles varies significantly by project type and the plan check pathway used. LADBS offers multiple plan check options: counter plan check for smaller projects (often same-day), expanded counter plan check for mid-size projects (2 to 3 hours), and regular plan check for larger commercial and residential projects (4 to 8 weeks for initial review). Most commercial projects require at least one correction cycle, adding 2 to 6 weeks per round. Below is a full breakdown of permit timelines, costs, the application process, and how to navigate the LADBS online portal.
Los Angeles Plan Review Timeline
| Review Stage | Estimated Timeline |
|---|---|
| Counter plan check (small residential: decks, fences, pools, minor remodels) | Same day (45 to 60 minutes at LADBS office) |
| Expanded counter plan check (ADUs, room additions, tenant improvements) | Same day (2 to 3 hours at LADBS office) |
| Regular plan check – initial review (commercial new construction, large residential) | 4 to 8 weeks |
| ADU with pre-approved standard plans | 2 to 3 weeks |
| ADU with custom plans | 8 to 16 weeks |
| Correction cycle (per round) | 2 to 6 weeks |
| Express plan check (if eligible) | Reduced timeline available |
Most commercial projects in Los Angeles go through 1 to 3 correction cycles before final approval. Each correction round adds 2 to 6 weeks depending on complexity and LADBS workload. Total time from application to permit issuance for a typical commercial project is 3 to 6 months when corrections, zoning review, and inter-departmental clearances are factored in. Complex projects involving discretionary approvals, environmental review, or historic preservation can take significantly longer.
Last verified: March 2026 | Source: LADBS Plan Review & Permitting
Need it faster? Permit Place can expedite your Los Angeles permits
ePlanLA Online Permitting Portal
The City of Los Angeles uses ePlanLA as its electronic plan submission system. Through ePlanLA, applicants can submit project plans, drawings, and construction documents digitally. To access ePlanLA, you must first register for an Angeleno Account, which is the City of Los Angeles single sign-on system that provides access to LADBS and other city department services.
In addition to ePlanLA, LADBS maintains its Services Portal at ladbsservices2.lacity.org for permit applications, inspection scheduling, fee payments, and status tracking. You can also check existing permits, view inspection results, and look up building records online.
For in-person service, visit any of the LADBS Development Services Centers. The main office is located at 201 N. Figueroa St., Los Angeles, CA 90012. Walk-in hours are Monday, Tuesday, Thursday, and Friday from 7:30 AM to 4:30 PM, and Wednesday from 9:00 AM to 4:30 PM.
What Building Permits Do You Need in Los Angeles?
Los Angeles requires permits for nearly all construction, alteration, demolition, and change-of-use activity. LADBS issues a wide range of building and trade permits. The type of permit you need depends on your project scope, and many projects require multiple permits (building plus separate trade permits for electrical, plumbing, mechanical, and fire sprinkler work).
Commercial Building Permits
- New commercial construction: Full regular plan check with the longest timeline, reviewed by LADBS and multiple city departments including the Fire Department, Department of City Planning, Department of Public Works, and the Department of Water and Power
- Tenant improvements and interior buildouts: Smaller TI projects may qualify for counter or expanded counter plan check. Larger TI projects with structural changes go through regular plan check. Most commercial TI work in Los Angeles that involves structural, electrical, plumbing, or mechanical changes requires a building permit
- Change of use: Required when converting building occupancy (for example, retail to restaurant, office to medical clinic, warehouse to residential). May trigger zoning review, fire and life safety upgrades, ADA compliance, and additional entitlements
- Shell and core: Covers the building envelope, structural frame, and base building systems, separate from individual tenant improvement permits
- Seismic retrofit (soft-story): Los Angeles has a mandatory soft-story retrofit ordinance requiring owners of certain wood-frame buildings to strengthen them against earthquakes. LADBS has a dedicated soft-story permit category
Residential Building Permits
- New home construction: Full plan review including structural, mechanical, electrical, plumbing, and energy code compliance (Title 24)
- Additions and remodels: Required when adding square footage, modifying structure, or changing the building footprint. Kitchen and bathroom remodels that involve plumbing, electrical, or structural work require permits
- Accessory Dwelling Units (ADUs): Los Angeles has specific ADU regulations aligned with California state law. ADU permits must be approved or denied within 60 days of a complete application per AB 1332. LADBS offers a pre-approved Standard Plan Program with over 20 designs that can be approved in as little as 2 to 3 weeks
- Swimming pools and spas: Separate permit required, includes fencing and barrier requirements
- Decks, patios, and patio covers: Permit required for structures that affect load-bearing capacity or exceed size thresholds
- Fences and block walls: Permits required for masonry walls over 6 feet tall and retaining walls over 4 feet
- Solar photovoltaic systems: Permit required. California mandates solar on all new residential construction. LADBS offers expedited solar permitting
What Does Not Require a Permit in Los Angeles?
LADBS exempts certain minor work from permit requirements under LA Municipal Code Section 91.105:
- Painting, papering, tiling, carpeting, and similar cosmetic finish work
- One-story detached accessory structures (sheds, playhouses) under 120 square feet in area and 12 feet in height
- Fences that are not pool barriers, provided masonry fences are under 6 feet tall
- Retaining walls under 4 feet in height (measured from the bottom of the footing to the top of the wall), unless supporting a surcharge
- Platforms, walks, and driveways not more than 30 inches above adjacent grade
- Window awnings supported by an exterior wall and not projecting more than 54 inches from the building
- Replacement of existing equipment with equipment of comparable type and capacity (for example, replacing a water heater or furnace with a similar unit)
Note: Even exempt work must comply with all applicable codes. If you are unsure whether your project needs a permit, contact LADBS at (213) 473-3231 or check with Permit Place.
Other Los Angeles Permit Types
- Demolition permits: Required before any full or partial demolition. May trigger asbestos and lead-based paint abatement requirements
- Grading permits: Required for earthwork, site grading, and fill operations. Los Angeles has strict grading regulations due to hillside terrain and landslide risk
- Sign permits: Required for new, modified, or relocated signage. Los Angeles has detailed sign regulations that vary by zone
- Use of land permits: For temporary or special uses of land not involving new structures
- Relocation permits: Required when moving an existing building to a new site
- Non-building permits: For structures like retaining walls over 4 feet, tanks, towers, and other non-building structures
Trade Permits (Mechanical Permits)
Separate trade permits are required for most electrical, plumbing, HVAC, fire sprinkler, and elevator work. These are filed independently from the building permit and may be pulled by licensed trade contractors. LADBS groups these under “Mechanical Permits” in ePlanLA. Common trade permits include:
- Plumbing permits: For new plumbing installations, water heater replacements, sewer line work, and gas piping
- HVAC permits: For heating, ventilation, and air conditioning installations or replacements
- Fire sprinkler permits: For new fire suppression systems or modifications to existing systems
- Elevator permits: For new elevator installations, modernizations, and alterations
- Electrical permits: Note that electrical permits in the City of Los Angeles are issued by the Department of Water and Power (LADWP), not LADBS
How the Los Angeles Permit Review Process Works
Step 1: Determine Your Plan Check Pathway
LADBS offers three main plan check pathways, and choosing the right one is the first step in the process:
- Counter Plan Check: For smaller projects like minor remodels, fences, block walls, decks, pools, and simple additions. You bring your plans to an LADBS Development Services Center and a plan checker reviews them on the spot, typically in 45 to 60 minutes. If plans are approved, you can receive your permit the same day.
- Expanded Counter Plan Check (ECPC): For medium-sized projects like ADUs, room additions, and straightforward tenant improvements. Reviews take 2 to 3 hours at an LADBS office. You may receive approval the same day.
- Regular Plan Check: For large commercial construction, multi-family residential, complex tenant improvements, and any project requiring review by multiple city departments. Plans are submitted via ePlanLA and reviewed over 4 to 8 weeks.
Step 2: Prepare Your Application and Plans
Before submitting, gather all required documents. For commercial projects in Los Angeles, you will typically need architectural plans, structural engineering calculations (stamped by a California-licensed engineer), MEP drawings, a Title 24 energy compliance report, a site plan, geotechnical and soils reports (for new construction), and any applicable zoning documentation. Residential projects require construction drawings, a plot plan, Title 24 energy calculations, and structural engineering if modifications affect load-bearing elements.
Los Angeles has specific seismic design requirements that apply to nearly all construction. Your structural plans must comply with the 2022 California Building Code seismic provisions, which are among the most stringent in the nation. Projects in hillside areas, liquefaction zones, or fault zones may require additional geotechnical studies.
Step 3: Submit Your Application
Submit your permit application through ePlanLA for regular plan check projects. You will need an Angeleno Account to access the system. For counter and expanded counter plan check, visit any LADBS Development Services Center in person with your plans and application.
LADBS Development Services Centers are located at:
- Metro (Downtown): 201 N. Figueroa St., 4th Floor, Los Angeles, CA 90012
- Van Nuys: 6262 Van Nuys Blvd., Room 251, Van Nuys, CA 91401
- West Los Angeles: 1828 Sawtelle Blvd., 2nd Floor, Los Angeles, CA 90025
- South Los Angeles: 8475 S. Vermont Ave., 2nd Floor, Los Angeles, CA 90044
Step 4: Plan Review and Corrections
During regular plan check, LADBS reviews your submitted plans for building code compliance, structural adequacy, fire and life safety, energy code (Title 24), accessibility (ADA/CBC Chapter 11B), and zoning compliance. For commercial projects, plans are also routed to the Fire Department, Department of City Planning, and other agencies as needed.
If corrections are required, LADBS issues plan check comments. You will need to revise your plans and resubmit. Each correction cycle adds 2 to 6 weeks. Most commercial projects go through 1 to 3 correction rounds before final approval. Submitting complete, code-compliant plans on the first attempt is the single best way to reduce your total permit timeline in Los Angeles.
Step 5: Permit Issuance and Inspections
Once all review departments approve your plans and all clearances are obtained, the building permit is issued after fees are paid. LADBS requires inspections at key construction milestones. All construction work is divided into stages, and each stage must be inspected and approved before the work is covered and the next stage begins.
Common LADBS inspection stages include:
- Excavation and foundation
- Concrete pour (pre-pour inspection)
- Framing and shear wall nailing
- Electrical rough-in
- Plumbing rough-in and top-out
- HVAC rough-in
- Insulation and energy code compliance
- Drywall (lath inspection)
- Roofing
- Final inspection and certificate of occupancy
Inspections can be scheduled online through the LADBS Services Portal, by calling 3-1-1, or by calling the LADBS inspection request line. Virtual inspections are also available for qualifying inspection types.
Expedited and Express Review
LADBS offers several options to accelerate the permit process for qualifying projects. The counter and expanded counter plan check pathways provide same-day service for eligible projects. For regular plan check projects, applicants may qualify for expedited processing depending on project type and LADBS workload. Additionally, the LADBS pre-approved ADU Standard Plan Program significantly reduces review times for accessory dwelling units. Let Permit Place manage the expedited process for you to make sure your application is routed through the fastest available pathway.
Note: These timelines reflect general review periods. Large, complex, or discretionary projects may take significantly longer. Projects requiring environmental review (CEQA), zoning variances, conditional use permits, or historic preservation review follow separate timelines. Request a quote from Permit Place for a project-specific estimate, or get an instant due diligence report from PermitNow.io.
Los Angeles Building Permit Costs
LADBS permit fees are calculated based on project valuation. The base building permit fee starts at approximately 0.5% of the first $50,000 in construction value, with a declining percentage applied to higher valuations. In addition to the building permit fee, applicants pay a plan check fee (85% of the building permit fee), a technology surcharge (2 to 3%), and any applicable trade permit fees. LADBS fees were last updated in February 2026, with a 5 to 7% increase over prior rates.
| Project Type | Typical Permit Fee Range |
|---|---|
| Kitchen remodel ($50,000 valuation) | ~$850 |
| Accessory Dwelling Unit / ADU ($150,000 valuation) | ~$3,700 |
| New single-family residence ($600,000 valuation) | ~$8,900 |
| 10-unit apartment building ($2,500,000 valuation) | ~$42,000 |
| Plan check fee | 85% of the building permit fee |
| MEP permits (plumbing, HVAC, fire sprinkler) | $150 to $1,500 each |
| Technology surcharge | 2% to 3% of permit fee |
| Commercial tenant improvement (moderate scope) | $1,000 to $8,000+ |
| Commercial new construction ($1M+ valuation) | $15,000 to $50,000+ |
| Swimming pool / spa | $400 to $1,200 |
| Demolition permit | $200 to $800 |
| Solar PV system | $200 to $500 |
Fee figures are based on LADBS fee schedules and typical project valuations. Actual fees depend on your specific project valuation, scope, and any additional clearances required. LADBS provides a Fee Estimator tool on their website. Contact Permit Place for a project-specific cost estimate.
For a detailed permit cost breakdown specific to your Los Angeles project, get a free due diligence report from PermitNow.io.
Los Angeles Permits: Self-Filing vs. Using a Permit Expediter
| Factor | Self-Filing | With Permit Place |
|---|---|---|
| Application preparation | You research LADBS requirements, determine the correct plan check pathway, prepare documents, and navigate ePlanLA | Permit Place prepares your full application package and determines the fastest plan check route |
| Typical correction cycles | 2 to 4 rounds (incomplete submissions and code errors cause extra rounds) | 1 to 2 rounds (complete, code-compliant first submissions reduce rejections) |
| Total timeline (commercial) | 4 to 8 months including corrections and inter-agency clearances | 3 to 5 months with complete first submissions and proactive follow-up |
| Corrections and resubmittals | You interpret plan check comments, coordinate with your design team, and resubmit through ePlanLA | Permit Place manages all corrections, coordinates with reviewers, and handles resubmittals |
| Inter-departmental clearances | You track reviews across LADBS, Fire Department, City Planning, DWP, Public Works, and other agencies | Single point of contact; we coordinate all departments and track clearances |
| Local knowledge | Must learn LADBS processes, fee structures, and which Development Services Center to visit | Permit Place has expedited permits in Los Angeles since 2003 with deep LADBS relationships |
Los Angeles County vs. City of Los Angeles Permit Jurisdiction
It is important to understand the difference between the City of Los Angeles and Los Angeles County when it comes to building permits. The City of Los Angeles is one of 88 incorporated cities within Los Angeles County. LADBS only has jurisdiction within the City of Los Angeles limits.
If your project is in an unincorporated area of Los Angeles County (not within any city limits), your permits are handled by the Los Angeles County Department of Public Works, Building and Safety Division, which has a completely different permit system, fee schedule, and review timeline.
If your project is in another incorporated city within Los Angeles County (such as Long Beach, Pasadena, Glendale, Santa Monica, or Burbank), that city has its own building department and permit process.
Check your project address carefully. The City of Los Angeles covers 469 square miles and includes neighborhoods like Hollywood, Downtown LA, Venice, Encino, San Pedro, Sylmar, and Woodland Hills. But adjacent communities like Beverly Hills, West Hollywood, Culver City, and Santa Monica are separate cities with their own building departments.
For Los Angeles County permit information, see our Los Angeles County Building Permits guide.
Recent Los Angeles Building Permit Policy Updates
Several important policy changes affect building permits in Los Angeles as of early 2026:
- 2025 Title 24 Energy Code (effective January 1, 2026): The latest California Energy Code update introduces stricter insulation requirements, expanded solar PV mandates, and new battery storage requirements for certain building types. All new detached ADUs require solar panels. Multifamily and some nonresidential buildings may now also require battery energy storage systems.
- ADU Pre-Approved Plans Program: LADBS now offers over 20 pre-approved ADU designs through the Standard Plan Program. These pre-approved plans can be permitted in as little as 2 to 3 weeks, compared to 8 to 16 weeks for custom ADU plans. Per AB 1332, LADBS must approve or deny a complete ADU application within 60 days.
- Soft-Story Retrofit Ordinance: The City of Los Angeles requires seismic retrofitting of certain wood-frame soft-story buildings. Property owners who have not yet complied face escalating penalties. LADBS has a dedicated permit pathway for these retrofits.
- AI-Assisted Plan Review: LADBS has begun implementing AI-assisted review tools to help expedite certain plan check processes and reduce review backlogs.
- Self-Certification Programs: Licensed architects and engineers may self-certify certain aspects of plan review for qualifying projects, reducing the review workload on LADBS staff and accelerating timelines.
- Wildfire Rebuild Expediting: In response to recent wildfire events, the City of Los Angeles has established expedited permitting pathways for rebuilding in fire-affected areas.
- Fee Updates (February 2026): LADBS implemented a 5 to 7% fee increase over 2024 rates, reflecting system updates and inflation adjustments.
Los Angeles Building Department Contact Information
City of Los Angeles Department of Building and Safety (LADBS)
- Website: dbs.lacity.gov
- Online Plan Submission: ePlanLA
- Online Services Portal: ladbsservices2.lacity.org
- Headquarters Address: 201 N. Figueroa St., Los Angeles, CA 90012
- General Information: (213) 473-3231
- City Helpline: 3-1-1 (within Los Angeles)
- Walk-In Hours: Mon/Tue/Thu/Fri: 7:30 AM – 4:30 PM; Wed: 9:00 AM – 4:30 PM
- Van Nuys Office: 6262 Van Nuys Blvd., Room 251, Van Nuys, CA 91401
- West LA Office: 1828 Sawtelle Blvd., 2nd Floor, Los Angeles, CA 90025
- South LA Office: 8475 S. Vermont Ave., 2nd Floor, Los Angeles, CA 90044
Los Angeles Permit Search
You can look up existing permits, inspection results, and building records through the LADBS Services Portal. Search by address, permit number, or application number. LADBS also maintains an Online Building Records database where you can view the full permit history of any property in the City of Los Angeles. This is useful for verifying whether a property has open permits, unpermitted work, or code violations before purchasing or leasing commercial space.
Frequently Asked Questions About Los Angeles Building Permits
How long does it take to get a building permit in Los Angeles?
Building permit review times in Los Angeles depend on the plan check pathway. Counter plan check for small projects takes 45 to 60 minutes (same day). Expanded counter plan check for mid-size projects takes 2 to 3 hours (same day). Regular plan check for commercial and large residential projects takes 4 to 8 weeks for initial review, with each correction cycle adding 2 to 6 weeks. Most commercial projects go through 1 to 3 correction rounds, making the total timeline 3 to 6 months from application to permit issuance. ADUs with pre-approved plans can be permitted in 2 to 3 weeks.
How much does a building permit cost in Los Angeles?
Los Angeles building permit fees are based on project valuation. A kitchen remodel at $50,000 valuation costs approximately $850 in permit fees. An ADU at $150,000 valuation costs approximately $3,700. A new single-family home at $600,000 valuation costs approximately $8,900. A 10-unit apartment building at $2.5 million valuation costs approximately $42,000. Plan check fees are 85% of the building permit fee, and a 2 to 3% technology surcharge is added. MEP trade permits range from $150 to $1,500 each.
Can I apply for a Los Angeles building permit online?
Yes. LADBS offers online permit applications through ePlanLA for electronic plan submission and the LADBS Services Portal for permit applications, fee payments, and status tracking. You need an Angeleno Account (the City of Los Angeles single sign-on system) to access ePlanLA. You can also apply in person at any LADBS Development Services Center for counter and expanded counter plan check.
What types of building permits does Los Angeles issue?
LADBS issues building permits for new construction, additions, alterations, tenant improvements, ADUs, soft-story retrofits, swimming pools, fences and block walls, demolition, grading, signs, use of land, and relocation. Separate mechanical (trade) permits are issued for plumbing, HVAC, fire sprinkler, and elevator work. Electrical permits in the City of Los Angeles are issued by the Department of Water and Power (LADWP), not LADBS.
What does not require a building permit in Los Angeles?
Under LA Municipal Code Section 91.105, the following work does not require a building permit: painting, papering, tiling, and carpeting; one-story sheds under 120 square feet and 12 feet in height; fences that are not pool barriers (masonry fences under 6 feet); retaining walls under 4 feet; platforms, walks, and driveways not more than 30 inches above grade; window awnings under 54 inches in projection; and replacement of existing equipment with comparable equipment. Even exempt work must comply with all applicable codes.
Does Los Angeles offer expedited building permit review?
Yes. LADBS offers multiple ways to accelerate permits. Counter plan check provides same-day approval for small projects. Expanded counter plan check offers same-day processing for medium projects. The pre-approved ADU Standard Plan Program reduces ADU reviews to 2 to 3 weeks. LADBS is also implementing AI-assisted review and self-certification programs to reduce processing times. Permit Place can evaluate which expedited pathway is best for your project.
Do I need a permit for a tenant improvement in Los Angeles?
Yes, most tenant improvements in Los Angeles that involve structural changes, electrical work, plumbing, HVAC, or changes to fire and life safety systems require a building permit from LADBS. Simple cosmetic changes such as painting, carpeting, and non-structural finish work typically do not require a permit. Many commercial TI projects in LA can be reviewed through the counter or expanded counter plan check pathways, which provide same-day approvals.
What building codes does Los Angeles follow?
Los Angeles enforces the 2022 California Building Code (CBC), which is based on the 2021 International Building Code with extensive California amendments. The city also enforces the California Residential Code, California Mechanical Code, California Plumbing Code, California Electrical Code, California Fire Code, and the California Energy Code (Title 24). The City of Los Angeles applies its own local amendments through the Los Angeles Municipal Code (LAMC) Chapter IX, Article 1, which adds requirements beyond the state codes, particularly for seismic design, hillside construction, and fire safety.
What inspections are required for Los Angeles building permits?
LADBS requires inspections at every major construction stage. Common inspection types include: excavation, foundation, concrete pre-pour, framing, shear wall nailing, electrical rough-in, plumbing rough-in, HVAC rough-in, insulation and energy code compliance, drywall (lath), roofing, and final inspection. The permit holder is responsible for scheduling inspections as work progresses. Inspections can be requested online, by phone (3-1-1), or through the LADBS Services Portal. Virtual inspections are available for qualifying inspection types.
Do I need a permit for an ADU in Los Angeles?
Yes, all new accessory dwelling units (ADUs) in Los Angeles require a building permit from LADBS. Under California law (AB 1332), LADBS must approve or deny a complete ADU application within 60 days. If no action is taken within 60 days, the application is deemed approved. LADBS offers pre-approved ADU designs through the Standard Plan Program that can be permitted in as little as 2 to 3 weeks. Custom ADU plans typically take 8 to 16 weeks. All new detached ADUs must include solar panels per the California Energy Code.
Who oversees building permits in Los Angeles?
The City of Los Angeles Department of Building and Safety (LADBS) is the authority having jurisdiction (AHJ) for building permits within the City of Los Angeles. LADBS oversees plan review, permit issuance, construction inspections, and code enforcement. Their headquarters is at 201 N. Figueroa St., Los Angeles, CA 90012. Contact LADBS at (213) 473-3231 or dial 3-1-1 within the City of Los Angeles. Note that LADBS only covers the City of Los Angeles, not unincorporated LA County or other cities within the county.
Can a permit expediter help with my Los Angeles project?
Yes. Permit Place has expedited building permits in Los Angeles and over 600 other jurisdictions since 2003. We handle everything from application preparation and plan check pathway selection through corrections, inter-departmental clearances, and permit issuance. Our clients typically get permits faster because we submit complete, code-compliant applications that reduce correction cycles, and we have established relationships with LADBS staff. For national chains and multi-location rollouts across LA, we provide a single point of contact for all locations.
Need Help With Los Angeles Building Permits?
Permit Place has helped hundreds of businesses get permits in Los Angeles and across California since 2003. We handle everything from application to approval so you can focus on building.
Request a Free Quote
Free DD Report
Want to know exactly what permits your project needs? Get an instant due diligence report from PermitNow.io. View a free demo DD report
Related Permitting Resources
Case Studies in Los Angeles
- Smart & Final — Los Angeles, CA
6 simultaneous approvals - KBS&S — Los Angeles, CA
Industrial permit approvals - RSP Architects — Los Angeles, CA
Bank renovation permits 4 weeks early - Cash Cards Unlimited — Los Angeles, CA
4-week approvals - Popstore Commercial — Los Angeles, CA
Approvals 2 weeks ahead of schedule - Little Caesar’s — Los Angeles, CA
Restaurant permits - Fresh and Easy — Los Angeles, CA
Liquor license permits - Banquet Kitchen — Los Angeles, CA
Health approvals
